Output band pass filterEach preamplifier has a band-pass filter at its output to further help the front end of your radio not intermodular.
Preamplifier with integrated VOX circuit, coaxile relays and bias tee on board. It can work up to 100W and performs TX to RX switching automatically.
Ultra Low Noise INNOVATIVE Preamplifier available for the 2 meter band. Low noise figure (type 0.35dB with coaxial relay active).
Thanks to the notch filter present at the input it is possible to attenuate the LTE frequency at 900MHz.
It can be powered, as well as by the passing capacitor, also through BIAS TEE with a voltage of 9 to 15V and a maximum absorption current of 130mA .
Coaxial relays on board up to 100W of transit
INTEGRATED VOX circuit
Supply via Bias tees with voltage from 9 to 15V
Ultra low noise from 420 to 450MHz ( typ. 0,35dB )
Output pass band filter
LTE 900MHz notch filter
High quality connectors.
50 Ohm input/output with N female
Supply : Bias tee or via SO239
Tin box with clamping brackets with mast up to 60mm ..
Power supply: 9-13.8V
Max Input power : 100W
Minimum relay switching power : 500mW
OIP3 : +29dBm
Noise figure: circa 0,35dB