Latest generation E-pHEMTThe preamplification module uses the latest technology on the market today offering very low noise characteristics and unmatched robustness.
True miniaturized coaxial relaysThe relays used in all our preamps are coaxial and non-traditional. In our circuits AXICOM HF-3-56 are used which allow an isolation between the ports of over 80dB, an insertion loss of only 0.03dB and an excellent return loss.
Input notch filterOur pole and coaxial preamps for 50 MHz are the only ones on the market to have a 88-108MHz notch filter. This solution helps to amplify only the signals and not overloading the radio frontend.
Support Bias TeeAll our preamps are also powered by coaxial cable. A bias tee must be purchased.
Output band pass filterEach preamplifier has a band-pass filter at its output to further help the front end of your radio not intermodular.
Preamplifier with integrated VOX circuit, coaxile relays and bias tee on board. It can work up to 100W and performs TX to RX switching automatically.
Ultra Low Noise INNOVATIVE Preamplifier available for the 6 meter band ( 50 to 54 MHz ). Low noise figure (type 0.35dB with coaxial relay active).
It can be powered, as well as by the passing capacitor, also through BIAS TEE with a voltage of 9 to 15V and a maximum absorption current of 130mA .
Coaxial relays on board up to 100W of transit
INTEGRATED VOX circuit
Supply via Bias tees with voltage from 9 to 15V
Ultra low noise from 50 to 54MHz ( typ. 0,35dB )
Output pass band filter
High quality connectors.
50 Ohm input/output with N female
Supply : Bias tee or via SO239
Tin box with clamping brackets with mast up to 60mm ..
Power supply: 9-13.8V
Max Input power : 100W
Minimum relay switching power : 500mW
OIP3 : +29dBm
Noise figure: circa 0,35dB